Matisse Double Ultraglide Track - Hand or Cord Drawn
A high quality aluminium track suitable for most curtains.
NB. Corded tracks are not recommended for very heavy curtains (eg. lined velvet).
Possible uses:
- an unlined or sheer curtain on the front and a separate lining on the rear.
- a solid curtain on the front and a sheer curtain on the rear.
Customise to your requirements.
Either or both tracks can be hand drawn or cord drawn.
This set can be bent in the factory to fit around your corners or angles. Not recommended for the cord drawn option - see notes below.
Maximum length is 6500mm for the cord drawn option. For hand drawn tracks, longer lengths can be achieved by ordering two tracks and a joiner (see notes/link below)
Available in 11 standard colours.
Set includes 2 x Ultraglide tracks, 12-15cm adjustable brackets with square feet & covers, colour coordinated glides and end stops.
Made in NZ.
Delivery nationwide or available for collection in Auckland, Wellington & Christchurch.
Priced from $97.00
Bent Tracks
NB. Cord drawn curtains on bent or curved tracks are more difficult to operate. The friction of the cords on the aluminium as they pass around a bend or curve can a have a significant effect.
For this reason it is advisable to choose a hand drawn option if you need bent or curved tracks.
Or if you choose to order a cord drawn curved track, please be aware that operating the curtain will require a lot more effort and the control end will need very secure fixing for the brackets to minimise damage to your wall.
If you would still like to proceed with ordering a curved track please give the actual wall measurements and angles where the tracks are to be fitted.
For the wall or face-fixed option, do not make any deductions or additions for brackets - these will be made in the factory.
For ceiling or top-fixed installations please give the distance out from the wall that you wish the rods to be fitted.
After purchase, you will be contacted by email if any additional information is required prior to manufacture.
Tracks over 6500mm long
If you need a set that is over the maximum length of 6500mm, please order two sets that total your length required and, in addition, order 1 x Ultraglide track joiner. Ideally, this joiner should be positioned where your curtains meet (usually in the centre of the rod). Your rods will be delivered as two pieces and they will need to be joined during installation (simply insert the joiner into the end of one rod and push the other rod onto it).
View your shopping basket or Browse other items in Double Tracks.
